Square Tube Shock Tab

Description

The Motobilt square cut shock tabs are laser cut out of 1/4 inch thick steel plate. They feature a 1/2 inch mounting hole and have a 90 degree cut out to fit square tubing. These have tons of uses such as shock mounts, cross member mounts, and much more.

• Square cut shock tab for 1.75 inch square tube
• laser cut out of 1/4 inch thick steel plate
• 1/2 inch mounting hole
• Center of hole to the mounting surface on both sizes is 1.5 inch
• 90 degree cut out to fit square tubing
• Sold as Each

Note:

• Ships bare steel
• These have tons of uses such as shock mounts, cross member mounts, and much more